ACS ROOF | Over Cab Platform Rack for FORD BRONCO

Q: Can I add lockable, water-resistant storage to the ACS ROOF?

Yes, with the GearPOD ROOF accessory. It's a nearly 96-quart, side-opening storage box with locking handles and a water-resistant seal, so you can access your gear from the side without climbing onto the roof of your Bronco.

Ford Bronco 4-door hardtop with Leitner Designs ACS ROOF no-drill platform roof rack installed

Leitner Designs ACS ROOF platform rack for Ford Bronco, angled product view

Leitner Designs ACS ROOF roof rack for Ford Bronco showing adjustable sliding load bars

Leitner Designs ACS ROOF aluminum platform rack for Ford Bronco, detail view

Leitner Designs ACS ROOF roof rack for Ford Bronco mounted over the cab

Leitner Designs ACS ROOF custom aluminum crossbar extrusion comparison

Extra load bar accessory for the Leitner Designs ACS ROOF platform rack

Leitner Designs ACS ROOF custom front and rear aluminum extrusion detail

Leitner Designs ACS ROOF custom side aluminum extrusion detail

Ford Bronco ACS ROOF platform rack dimension and fitment schematic

Ford Bronco with Leitner Designs ACS ROOF roof rack, rear three-quarter view

Ford Bronco with Leitner Designs ACS ROOF no-drill roof rack, front view

Ford Bronco with Leitner Designs ACS ROOF platform rack carrying gear

Ford Bronco with Leitner Designs ACS ROOF roof rack installed over the cab

Ford Bronco with Leitner Designs ACS ROOF modular platform roof rack, detail view

Ford Bronco with Leitner Designs ACS ROOF roof rack, close-up of load bars and mounting

ACS ROOF | Over Cab Platform Rack for FORD BRONCO

$2,100.00

SELECT VEHICLE & RACK

Quantity

ACS ROOF: The Modular, No-Drill Roof Rack for Your Ford Bronco

A low-profile, no-drill platform rack with infinitely adjustable load bars — engineered specifically for the Ford Bronco, fits all trim levels including painted hardtops, and built to expand as your gear does.

No-drill, bolt-on install. Comes with all mounting hardware.

✓ No-drill, bolt-on — adds just 4 inches to your Bronco's height, with no permanent modification.
✓ Fits all Bronco trim levels — designed to fit every Bronco trim, including painted hardtops.
✓ Allows hardtop removal — the platform is designed so you can still remove the factory 3-piece hardtop.
✓ Modular, adjustable load bars — slide into toothed channels so you can reposition gear or add bars as your setup grows.
✓ Cross-brand compatible — works with T-track accessories from Thule, Rhino-Rack, and Yakima.
✓ Side-access, lockable storage ready — pairs with the GearPOD ROOF side-opening, water-resistant, locking storage box.
✓ Expandable platform — add more load bars to build out a solid, flat cargo surface as your needs grow.

Why ACS ROOF

ACS ROOF brings 10 years of Active Cargo System engineering — and hundreds of thousands of off-road testing miles — to the roof of your Ford Bronco. It's a modular, no-drill platform rack with infinitely adjustable sliding load bars, built stronger and lighter than typical roof rack systems, and easy enough to assemble yourself.

Every ACS ROOF is over-engineered and over-built in Corona, California, with Grade 10.9 black Zi-Ni fasteners, a dual-stage powder coat finish, and a low 4-inch profile that keeps your Bronco looking factory-clean. Removable corner caps make auxiliary lighting installation simple — no drilling or zip ties — and the platform is designed to still allow removal of the Bronco's 3-piece hardtop.

Specifications

Part #	00-B4DHTRA-1699
Weight	75 lbs
Overall height	4 inches
Material	Aluminum alloy
Fasteners	Grade 10.9 black Zi-Ni coated with Loctite
Wall thickness	Heavy-duty 1.5mm to 3.0mm multi-wall aluminum
Wind noise reducer	Included
Accessory compatibility	Fits many Thule, Rhino-Rack, and Yakima T-track accessories
Finish	Zinc-plated with dual-stage powder coat
Load capacity	1,000 lbs static, 600 lbs on-road, 300 lbs off-road (always check your vehicle manufacturer's roof load rating)
Fitment	Ford Bronco — all trim levels, including painted hardtops (4-door hardtop, full length)
Origin	Designed, engineered, and manufactured in the USA

Installation

ACS ROOF installs with basic hand tools and no drilling — most owners complete the install in under an hour.

Position the rack

Set the ACS ROOF frame onto the Bronco's factory roof mounting points.

Secure the fasteners

Attach using the included Grade 10.9 black Zi-Ni fasteners with Loctite, torquing to the spec in the install guide.

Adjust the load bars

Slide the load bars into the toothed channels and position them for your gear before locking them in place.

Confirm hardtop clearance

Confirm the platform is positioned so the factory 3-piece hardtop can still be removed if needed.

Download the full installation instructions (PDF) →

Frequently Asked Questions

See all FAQs →

Does the ACS ROOF rack require drilling to install on my Ford Bronco?

No. ACS ROOF is a no-drill, bolt-on roof rack that installs using the Bronco's factory mounting points.

Does the ACS ROOF fit all Bronco trim levels?

Yes. The ACS ROOF is designed to fit all Ford Bronco trim levels, including painted hardtops.

Can I still remove my Bronco's hardtop with the ACS ROOF installed?

Yes. The platform is designed to allow removal of the factory 3-piece hardtop.

How much height does the ACS ROOF add to my Bronco?

Just 4 inches. ACS ROOF is engineered with a low profile so it doesn't significantly change your vehicle's overall clearance.

Can I add lockable, water-resistant storage to the ACS ROOF?

Yes, with the GearPOD ROOF accessory. It's a nearly 96-quart, side-opening storage box with locking handles and a water-resistant seal, so you can access your gear from the side without climbing onto the roof of your Bronco.

Will my existing roof rack accessories fit the ACS ROOF?

Yes. ACS ROOF is compatible with many Thule, Rhino-Rack, and Yakima accessories that use T-track mounting hardware.

Can I install auxiliary lighting on the ACS ROOF?

Yes. The corner caps remove for quick auxiliary lighting installation, with no drilling or zip ties required.

Tags: ACS ROOF