Commercial, Fleet & Government

ACS FORGED bed rack on a Ford Super Duty in the desert
Commercial · Fleet · Government

Cargo Systems Built To Outwork The Job

The ACS FORGED platform is the only modular bed rack that publishes field-validated dynamic load ratings — not just a number measured while parked. Fielded by trade fleets, municipalities and first responders nationwide.

Made in USA Mojave Tested Pursuit-Rated
Fielded By Los Angeles County Fire Dept. Texas State Troopers Newport Beach SAR GAO Buy America Compliant Law-Enforcement Pursuit-Rated Mojave & Johnson Valley Validated
The Platform

ACS Forged
Active Cargo System

A fully modular, all-aluminum bed rack built around one idea: nothing should be permanent. Full-length toothed T-slot channels run the entire rail, so load bars and accessories lock down anywhere and reposition in minutes — tool-free. The patented rear sliding load bar rides the same channel, freeing the full bed for tall cargo without ever removing the rack.

ConstructionAerospace-grade aluminum
Weight≈85 lb
FitmentCompact, Mid-Size & Full-Size
ACS FORGED bed rack rail detail with T-slot channels and lockable toolbox
01 Top Bar 02 A / B Uprights 03 Extruded Rail 04 Sliding Load Bar 05 Rail Clamps
Why Fleets Switch

The Only Rack That Shows Its Work

Most manufacturers publish a single static rating — the biggest number, measured standing still. We publish what happens once the truck actually moves.

Static · Parked
1,400
Pounds
Dynamic · On-Road
800
Pounds
Dynamic · Off-Road
400
Pounds · Validated to 4.0g
01
Tension, Not Shear
Every critical fastener loads along its axis — where bolts are strongest — instead of sideways in shear like most competitor racks. It's the single biggest reason the platform holds more weight with less material.
02
Grade 10.9 Hardware
Alloy-steel fasteners rated to Grade 10.9 — zinc-nickel coated with friction modifiers and pre-applied threadlocker, torqued to spec so nothing backs out under sustained vibration.
03
Cast & CNC-Machined
Brackets are cast from 6061-T6 aluminum, then CNC-machined for dimensional consistency stamped sheet can't match — the full system still weighs in around 85 lb.
04
Dual-Stage Powder Coat
An e-coat primer plus powder topcoat, rated to ASTM D1654 corrosion standards — built for salt air, road brine and years of duty-cycle abuse without creep or blistering.
05
GAO Buy America
98% domestic content, GAO Buy America Act compliant — clears federal and municipal procurement without exceptions.
06
Mojave Validated
Field-tested on high-speed desert loops in Johnson Valley and the Mojave — not a lab estimate.
07
Pursuit-Rated
The only modular bed rack certified for law-enforcement pursuit response, validated to 4.0g.
08
Full-Rail Modularity
One toothed T-slot channel runs the entire rail — every accessory locks down anywhere along it with simple Torx hardware, no drilling required.
09
Universal T-Slot Compatible
Standard T-20 slot geometry is compatible with Yakima, Thule and many other third-party accessory mounts without adapters.
10
Patented Sliding Load Bar
The rear load bar repositions along the rail to carry tall cargo at full capacity — without ever removing the rack.
Who We Build For

One System. Three Missions.

GearPOD toolbox open on a plumbing service truck
Commercial
Trade & Service Fleets

Plumbing, electrical, HVAC and construction crews run lockable, organized storage that survives a full duty cycle — and looks sharp on the job site.

Crew loading equipment into a truck bed rack
Fleet
Multi-Vehicle Operators

Utility, telecom and rental fleets standardize on one modular platform across every truck — cutting upfit time and per-vehicle part numbers.

LA County Fire lifeguard truck equipped with ACS FORGED rack
Government
Municipal & Public Safety

Fire, EMS, lifeguard and law-enforcement fleets run the only pursuit-rated modular rack, backed by GAO Buy America compliance for procurement.

Truck parked in front of an American flag mural
Who We Are

Founder-Run.
Built In Corona, CA.

Leitner Designs is a founder-run American manufacturer, building every Active Cargo System from over 98% domestically sourced components — casting, forging and machining done in the USA, final assembly in Corona.

100%
US Designed &
Engineered
98%
Domestic
Content
2014
Founded &
Founder-Led
Beyond Standard

Custom Builds For Non-Standard Missions

When a fleet or agency needs something the catalog doesn't cover, our Corona shop specs and builds it — real fielded examples below.

Talk To A Rep
Los Angeles County Fire Dept custom ACS FORGED build
Los Angeles County Fire Dept.
ACS FORGED NDNS Bed Rack · GearPOD XL · Custom Buoy Mount · Custom Board Mount · Custom Emergency Light Bar Mount · 4″ Load Bar Risers · HydroPod
Placentia Police Dept custom ACS FORGED build
Placentia Police Dept.
ACS FORGED Bed Rack · GearPOD XL · GearPOD · HydroPod
DZYNE Technologies custom ACS FORGED build for defense applications
DZYNE Technologies
ACS FORGED Bed Rack · GearPOD XL · GearPOD — built for defense & warfighter payloads
Hi-Viz Lighting FireTech custom ACS ROOF over-cap build
Hi-Viz Lighting, Inc.
Custom-specification heavy-duty Leitner ACS ROOF over-cap platform, built for FireTech's mobile lighting fleet
Get In Touch

Let's Spec Your Fleet

Commercial, fleet and government pricing is quoted per build. Call or email and we'll get back to you the same business day.

180 Vander St, Corona, CA 92878  ·  Mon–Fri, 8am–5pm PT